When I turn on my headphones, my oled deck turns on. Neat, but unwanted when I’m using my headphones for other things, like my zoom meeting for work causing Dave the Diver sounds to come out of my headphones. How can I turn that off without disabling Bluetooth every time I put the deck to sleep?
This is interesting as I’m looking for the opposite answer. I want my Deck to wake up when I turn on my Xbox controller, but it doesn’t right now unless I wake it up with the power button first. If you find something outside of this thread, please let me know.
Only the new OLED decks have the Bluetooth chips with wakeup. If you have an OG deck, you’re plum outta luck, I’m afraid.
Damn. Oh well. Good to know though. Thanks!
I have the USB wireless receiver for my Xbox controller and it works on the steam deck to wake it, but I needed to install a driver. And I need to reinstall it every time I update my steam deck.
Where did you get the driver for it?
I needed to tweak the instructions a bit, but it looks like there was an update recently with a link to a script. Hopefully that makes it easier than before.
Do you have the oled deck? It has a new bt chip and firmware that enables this
Try putting a script like this in /lib/systemd/system-sleep/. Make sure it is executable.
#!/bin/sh case $1 in pre) bluetoothctl power off ;; post) bluetoothctl power on ;; esacWhat I said before, looks like a dead end.
Start with “cat /proc/acpi/wakeup” and “lspci”. My LCD deck doesn’t have the new BT chip with wakeup, but I think it might go like thisLook at lspci, find the Bluetooth there (Maybe it’s just part of the wifi?). Note its PCI address, and find a value in /proc/acpi/wakeup that corresponds to that. Take the name from the first column of /proc/acpi/wakeup, and do something like “echo GPPn | sudo tee /proc/acpi/wakeup” . If this works, then you’ll want to (a) make a slightly more permanent version of this per the arch wiki, and (b) remember to undo that when Valve finally gets around to doing a proper control for this.https://wiki.archlinux.org/title/Power_management/Wakeup_triggers
deleted by creator
I do not see a BT device in lspci, and the Network Adapter PCI address doesn’t show i /proc/acpi/wakeup,
I tried to create a systemd unit file that would issue an rfkill on bluetooth on suspend, and then re-enable it on resume, but that didn’t work either. Interestingly, if I do
systemctl stop bluetooththe bluetooth service stops, and then immediate starts again!(A)(root@steamdeck deck)# lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Root Complex 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge 00:01.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus 00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus 00:08.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 71) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 5 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 6 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 7 01:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. OM3PDP3 NVMe SSD (rev 01) 02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) 03:00.0 Network controller: Qualcomm Technologies, Inc QCNFA765 Wireless Network Adapter (rev 01) 04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 1435 (rev ae) 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Rembrandt Radeon High Definition Audio Controller 04:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] VanGogh PSP/CCP 04:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh USB0 04:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh USB1 04:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 50) 05:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function (rev 61) 06:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh SecUSB (A)(root@steamdeck deck)# cat /proc/acpi/wakeup Device S-state Status Sysfs node GPP0 S4 *disabled GPP1 S4 *enabled pci:0000:00:01.2 GPP2 S4 *enabled pci:0000:00:01.3 GPP3 S4 *enabled pci:0000:00:01.4 GPP4 S4 *disabled GPP5 S4 *disabled GP17 S4 *enabled pci:0000:00:08.1 XHC0 S4 *enabled pci:0000:04:00.3 *disabled platform:dwc3.1.auto XHC1 S4 *enabled pci:0000:04:00.4 GP19 S4 *enabled pci:0000:00:08.3 XHC2 S4 *disabled pci:0000:06:00.0 ```*___*Oop. Look up. I changed the parent post, maybe this time it’ll work?
