I’ve not fetched subtitles in a while but back when I did, I recall all the websites hosting them were extremely protectionist… more so than any other category of content on the web.
Of course the fix is to have torrents for the subtitle collections, perhaps by language.
It basically is saying that if you have more money then you have more “votes”.
That’s simply true. It doesn’t do anyone any good to disregard the facts.
Or to put it in another way: If you have more money you matter more.
That abstraction doesn’t help much. And first of all, it’s more accurate to derive the statement “If you have more money then you have more influence”.
It’s still a shitty status quo, but it is what it is. The worse thing you can do is tell people not to boycott shit products on the basis of rejecting reality. It’d be like telling people not to vote in elections because their vote is a drop in the ocean.
Some people vote for democrats, then they cancel their own vote by getting their internet service from Spectrum, buying fuel from Chevron for their car, shipping their packages using FedEx, getting their phone service from AT&T, banking at PNC Bank, flying on Boeing planes, shopping on Amazon, doing their web searches on a Microsoft syndicate’s site (e.g. DDG), buying Sony devices… etc. They either have no clue that most of their voting is actually for the republicans, or they think that drop-in-the-ocean vote that comes once in 4 years somehow carries more weight than the daily votes they cast with reckless disregard.
Greg Abbott’s war chest is mostly fed by oil companies. If you buy fuel for a car, you help Greg Abbott and other republicans. And if you buy from Chevron, you give the greatest support to republicans (Chevron is an ALEC member).
You might let her know that she can borrow DVDs from the public library at no cost. Another little-known gratis option is freesat and terrestrial broadcast. I recently started using MythTV as a PVR to record broadcast TV and was pleasantly surprised to find no commercial interruptions (but if there are commercials in her region, MythTV can cut them out).
I didn’t see the OP’s pic but these groups generally work against enshitification of the world:
Notice that none of those communities are on Cloudflared instances (thus also avoid propagating the enshitified portion of the fedi).
Ending capitalism is not the /only/ way. Within a capitalistic system, you can boycott shit. Most consumers are pushovers but it doesn’t have to be that way. I’m boycotting hundreds of shitty companies. Off the top of my head:
Those are all shitty companies that significantly worsen the world. Giving money or data to any of them contributes to enshitification of the world.
Of course it’s an option to stop supporting assholes. Become ethical. Be the change you want to see.
I appreciate the tip. The shank was ½ a bicycle axle bolt with non-standard threading. I could not have switched to a standard bolt because the nuts that interface to ball bearings needed to be on the bolt.
Good to hear your anchors held up over 10 years. Someone else just mentioned they’ve not bee so lucky: https://lemmy.dbzer0.com/comment/5372639 I suppose it’s important that they be used in a dry climate.
That’s good to know. I would hope a metal anchor to reshape when temp causes expansion. It’s a shame to hear it’s the brick that’s forced to expand. In my case it’s a solid metal rod, so it sounds like the metal is guaranteed to split the brick in a temp change.
It sounds like I have to pull out the shank, bore the hole to 10mm, and either use chemical anchor or fasten it using a sheet metal w/2 nuts.
Is this a friction anchor?
https://lemmy.dbzer0.com/pictrs/image/f504ebc8-a015-4b7a-907d-85eabdfc260a.webp
I just learned these exist from the other thread. Though I doubt it would have helped in my case. At this point I’ll just have to check it over the seasons and see if temp changes have caused any issues.
I was mainly asking for future reference whether I should repeat what I did or not. I suppose it’s rare that a smooth rod needs to be installed on brick.
EDIT: looks like the link died due to the comment containing that image being deleted. Sorry about that.
Both… functional art.
The original problem is that there was a water shut-off valve for the whole floor in the shower. Very ugly to have a valve in the corner on the floor and somewhat in the path of the water if someone were to point the showerhead slightly outside the pan. The valve handle was rusting. It was embedded in a solid block of concrete with the handle sticking out. The valve started to fail (did not completely shut off the water). And it was the kind of valve where the whole valve needed to be replaced. Terrible work by the builders. I had to demolish the concrete to reach the valve.
So I replaced the valve with the kind of valve that has a replaceable cartridge. But I also refused to embed it in concrete again. I will build a removable sealed box around it. But the box could not be both waterproof and also easily removable on the fly whenever the valve needs to be accessed. So I put a hole in the wall (shower to bedroom). Then I attached a 90° gearbox drill accessory and a shaft to that goes through the wall. On the bedroom side, I could have just put a handle. But I found a wood helm to a ship (miniaturized). I thought that would be the perfect steampunkish valve handle. But it did not clear the wall (in a corner). So i got carried away and put a bicycle sprocket on the shaft, and mounted the helm to another sprocket, which i attached to the wall higher up. And wrapped a chain between them.
I could not pull it out with my hands after tapping it in. But to be clear, there’s only a sheer force to deal with, and it’s light.
I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain wraps another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. It’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle.
This might come a bit too late but why didn’t you just get threaded rod and use one of these instead?
I did not know anchors like that existed for machine bolts. That’s good to know! However, it would not have helped in this situation. The bicycle axle has non-standard threading (~9mm bolt with a thread pitch that’s 2 steps away from the norm). Since it had a special nut that interfaced to ball bearings, I could not bring in a standard bolt or threaded rod. And the threaded portion of the axle was short enough that no threads could have gone into the wall. I could have added threads to the bare portion, but my die set skips the ø=9mm size.
I was asking more for future reference – whether or not I should ever repeat this. And I think you answered that. Even if I get lucky in the future on getting a perfect fit at that moment, temp changes could blow it. I guess I’ll assume anchors (chemical and mechanical) are designed to handle the temp changes.
Old red brick, which is solid. It’s light duty, and unusual. I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain runs to another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. But it’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle. I suppose you’re sorry you asked at this point.
product 1:
product 2:
product 3:
Going from memory I rotated between the products and I think I poured in about ⅓ of the clog clearing doses on the first two every few days… because I was a cheap bastard and just wanted to constantly have the enzymes in there. But yeah, probably a mistake. I think I tried a 300ml dose of product 2 just once. But I probably should have tried a full dose more often.
Right, but these were specifically for cleaning drains. One of them was kitchen drain specific, and the other two were for drains in general. But indeed it’s possible that the clog was not even organic… perhaps calcium deposits from hard water.
I wonder if pouring a whole bottle of enzymes would have worked. When pouring just 50—100ml or so, it would spread out on the bottom of the pipe and only touch the bottom part of the clog. But if a whole liter rushes through at once then it would cover the whole clog. But it’d be a pricey test.
I documented a drain horror story here, the fiasco of which involved 3 different enzyme-based drain cleaners. They seem to have a dual purpose: use a small amount every 1 or 2 weeks as a maintenance task, or pour down a large amount to work on a clog. I had a very slow drain and the enzymes made no apparent difference. But I know in general enzyme cleaners are quite good. It’s amazing how well they work on the oven. I had a general purpose enzyme based cleaner that worked great for things like food spills that dried on a wall.
I guess proteins is a little over my head. I just saw on the label a bunch of pac-mans gobbling up stuff. I understood that… and hoped I could multiply them. So IIUC, I just have to keep buying them and not reuse them much? Do they degrade in the original bottle just the same as if they’re in dirty water?
Im glad we agree. Because its the entire point. You are nitpicking where it suits you and thats not really honest conversation.Tor browser isnt the only way to access tor
TLS is useful very specifically in the case of banking via Tor Browser, which is the most likely configuration the normal general public would use given the advice to access their bank over Tor.
There are entire swaths of the world, billions of people, where phones are basically the only gateways to the inter.
I do not recommend using a smartphone for banking. You’re asking for a huge attack surface & it’s reckless. People will do it anyway but to suggest that people should avoid Tor for banking on the basis that you’re assuming they are using a phone is terrible advice based on a poor assumption. Use Tor Browser from a PC for banking. That is the best advice for normies.
The point is, again, that Tor and specifically exit nodes are more hostile than normal ISP relays.
And again, those hostile nodes get less info than ISPs. They have to work harder to reach the level of exposure that your ISP has both technical and legal privilege to exploit.
Saying selling metatdata that is unencrypted is the same level of malicious as a nation state going after you (life and death) or having your identity or bank account stolen is clearly pretty naive.
Wow did you ever get twisted. You forgot that I excluded targeting by nation states from the threat model as you should. If someone has that in their threat model, they will know some guy in a forum saying “don’t use Tor for banking” is not on the same page, not aligned with their scenario, and not advising them. You don’t have to worry about Snowden blindly taking advice from you.
It’s naive to assume your ISP is not collecting data on you and using it against you. It’s sensible to realize the risk of a honeypot tapping your bank account and getting away with it and regulation E protections failing is unlikely enough to be negligible.
You still have to deal with getting your funds back and paying for stuff to live in the interim.
If you’re in the US, you have ~2-3 bank accounts on avg, and 20 credit cards (US averages). Not to mention the unlikeliness of an account getting MitM compromised despite TLS in the 1st place. Cyber criminals choose the easier paths, just as 3 letter agencies do: they compromise the endpoint. Attacking the middle of a tunnel is very high effort & when it’s achieved they aren’t going to waste it on some avg joe’s small-time bank acct. At best you might have some low-tech attempts that result in no padlock on the user side. But I’ve never seen that in all my years of exclusively banking over Tor.
Thats a bad assumption.
Not in the slightest. Everyone is subject to mass surveillance & surveillance capitalism.
MOST people arent really concerned with it in the western world.
Most people don’t even have a threat model, or know what it is. But if you ask them how they would like it if their ISP told their debt collector where they bank so the debt collector can go do an unannounced legal money grab, you’ll quickly realize what would be in their threat model if they knew to build one. A lot of Corona Virus economic stimulus checks were grabbed faster than debtors even noticed the money arriving on their account.
And thats not a Trump thing. its existed WAY before trump. Snowden showed that and it was Obama, not trump, that went after whistleblowers harder than any predecessor before them.
You missed the source I gave. Obama banned the practice of ISPs selling customer data without their consent. Trump reversed that. That is wholly 100% on Trump. Biden did not overturn Trump, so if you want, you can put some of the fault on Biden.
W.r.t history, echelon predates Snowden’s revelations and it was exposed to many by Nicky Hagar in the 80s or 90s. But this all a red herring because in the case at hand (banking customers accessing their acct), it’s the particular ISP role of mass surveillance that’s relevant, which Trump enabled. Or course there is plenty of other mass surveillance going on with banking, but all that is orthogonal to whether they use Tor or not. The role of Tor merely mitigates the ISP from tracking where they bank, and prevents banks from tracking where you physically are, both of which are useful protections.
Further trying to make this about “party” sides is a bad idea. Its something all parties
You can’t “both sides” this when it’s verifiable that Obama banned the practice and Trump overturned it. While Obama’s hands are dirty on a lot of things (e.g. Patriot Act continuity), it’s specifically Trump who flipped the switch to ISP overcollection. Citation needed if you don’t accept this.
And there are some areas where straight access TOR is illegal and can get you in trouble.
The general public knows your general advice to use/not use Tor is technical advice not legal advice, and also not specific to their particular jurisdiction.
That’s not a magic bullet for secuirty.
It wasn’t presented as such. Good security comes in layers (“security in depth”). TLS serves users well but it’s not the only tool in the box.
There are so many ways to exploit connections. Look at what happened here on lemmy with vulns leading to takeovers of instances with xss of session cookies.
Tor Browser includes noscript which blocks XSS.
The primary difference is your ISP is not generally actively hostile. They may want to sell metadata but they aren’t actively trying to exploit you.
Selling your metadata is exploiting you. And this exploit happens lawfully under a still-existing Trump policy, so you have zero legal protections. Contrast that with crooks stealing money from your bank account, where, if it’s a US account, you have regulation E legal protections.
If your ISP (or in some cases a nation state is your isp) is actively tracking you, then there are other alternatives that may be better.
Different tools for different threat models. If you are actually targeted by a nation state, Tor alone is insufficient but it’s still in play in conjunction with other tech. But from context, you were giving general advice to the general public telling them not to use Tor for banking, thus targeting is not in the threat model. But mass surveillance IS (i.e. that of your ISP).
But to answer my your question my thesis is tor is not necessarily a privacy panacea.
Tor is an indispensable tool to streetwise users. Of course it is a tool among other tools & techniques.
The threat model an American or European has is much different than someone from Vietnam or turkey or China, which is also much different than someone from the Nordic countries.
Those threat models all have a common denominator: mass surveillance. It is safe to assume mass surveillance is in everyone’s threat model as a baseline. Of course there are a variety of other threats in each individual threat model for which you couldn’t necessarily anticipate.
Also. Those running an exit node can and do sniff traffic.
Sure, but if you stop there with that statement you’re just FUD-scaring people from using the service that does more for their privacy than conventional direct clearnet usage. Every connection that matters uses TLS so the exit node honeypot only sees where the traffic is going, not what’s in the traffic and not where it comes from. IOW, the exit node knows much less than your ISP.
It’s bad practice to login to stuff that’s important (like banking) over tor.
It’s the other way around. You should insist on using Tor for banking. It’s a bad practice to let your ISP track where you do all your banking.
Also, nation states can track you using a variety of techniques from fingerprinting to straight up working together to associate connection streams.
And your thesis is what, that we should make snooping easier for them by not practicing sensible self-defense?
A large number of tor nodes are run by alphabet agencies.
Let them work for it - and let them give the Tor network more bandwidth in the process.
I don’t know if it’s even possible, but it would be cool if I could use the fediverse over TOR just for the sake of supporting TOR.
Here are two #Mastodon onion nodes:
The others are right. Trying to stream from a torrent seems wasteful and complex.
But if you must for some strange reason, perhaps it would work to use webtor.io to produce an http-reachable audio file which could be curl/wget-fetched and piped to an audio decoder/player. I doubt you could make webtor fetch pieces linearly from the beginning. You would likely have to wait until the last piece is fetched to start streaming.