Filecoin showed promise as a nearly free option. I used to be a storage provider. Met a lot of other storage providers at conventions. The people involved were pretty alright. I haven’t interacted with the community in a few years though. Biggest problem I saw back then was a lack of a user friendly means of storing and retrieval. That might have changed now.
Whatever option you pick please make sure you encrypt your data before you send it off.
What ISP are you referring to? I have genuinely never heard of an isp that takes 24 hours to rotate your IP. Also utilizing dynamicdns is not going to incur more dns traffic? Dynamic DNS updates your dns provider from a system on your local network that your pub ip has changed then your provider will start sending traffic to the new ip. Propagation used to take a while but I haven’t experienced propagation wait times of over 10 minutes in years. This all being said dynamic DNS isn’t exactly the most elegant solution. It is just one of the simplest that I mentioned. There are significantly better options overall that completely take the requirement of a static pubip completely out of the equation and can be built using all free open source tools relatively easily.
I mean I’ll be real. Sure in some circumstances that could be an annoyance for 15 seconds for some software that might rely on a session whenever your ip changes like once a month if that. A rotating ip is probably one of the easiest things to work around amongst the plethora of challenges that ISPs present for those who want to self host.
I mean just take a look at what is involved if you are in a situation where cg-nat is implemented. You legitimately have no control over the root of your network at that point. I have that issue in particular with what is essentially a mobile hotspot as my failover for when my fiber fails. That being said I had to architect it in a way that took that took cg-nat into consideration. If I hadn’t then when fiber fails it would take down my services as a whole anyway.
My point is that those challenges have workarounds, you can solve those issues relatively easily and they even present a level of security. Where it is actively malicious is with restrictions to capacity such as upload limits in which they to a degree lie about their speeds and capacity. The terms of service stuff is just flat out awful too.
If you have control over at least the root of your network you can totally get away with hosting in a dynamic pub ip. You just need to set up dynamicdns. There are other ways of handling this specific issue too. You can always go to a colocation and set up a server there if you want. You could also create your own reverse proxy tunnel in a place that is public then forward it. There are lots of work arounds really. Yeah, it sucks that American ISPs generally don’t support ipv6 but there are totally ways to work around it all.
What really gets me up in arms is when they advertise gigabit connections or 500mb speeds only to limit upload to 20mb/s. That is where they are actively inhibiting self hosting communities.
Personally I did something similar here. You could likely find a rack for free if you look at to colos, data centers or schools. I got a 60u full enclosed rack from the colo I kept my servers at. The big problem was space. People look to get rid of them because they are such a burden in space.
Good stuff getting a gen9. I got a gen8 before I realized that there were firmware limitations particularly with a lack of support for gpt. I instead needed a really hacky workaround with mbr in order to run my name ssd as the boot drive at full capacity.
Also I like to drop this tool occasionally for any new homelabbers.
Ipfs is a really cool useful project.
Filecoin is cool for super cheap longterm cold archives
Helium is well. I have mixed feelings about it.
Akashnet is a cool decentralized marketplace for docker container deployments.
There are a few peer to peer decentralized vpn things here and there.
There are tons of projects that are cool in concept but I really have to say you are more likely than not to lose money if you speculate on any tokens attached to the projects.
So I found appreciation for Kendrick Lamar and Tyler the creator after getting a pair of audio technica m50x to go with my Scarlett 2i2. I always liked a few songs from each of them but on those headphones in flac the music is legitimately night and day. They don’t even sound like the same music. Especially in the case of Kendrick who loves to throw tons of interesting things in to his beats that 100% go unnoticed unless you have a good set of headphones.
Where it really makes a difference is in music that is very well produced but busy. A good example would be like the foo fighters. Typically to me they sound pretty meh due to the heavy use of crash cymbals. Compression of lesser quality formats just makes the fantastic guitar tones and everything else just meld into this kind of slop when you hear it in mp3. Seriously do a side by side on something like monkey wrench.
A huge album that I have rediscovered is the entire album cross by Justice. It’s just mp3 but even with the dac and headphones it makes it sound great vs in the car only being meh thanks to repetitive things being highlighted.
Tl;dr. Good headphones+dac+flac = makes 78% of music you have heard 1000 times gooder.
Def would say it’s classical inspired but I would likely consider it more orchestral but you could also look up midi music or tracker music if you’re looking for older samples but the same vibes in terms of the piano intro but for longer bits.
Taildrop works relatively well for most all circumstances. Only thing is you gotta use trayscale or cli currently for sending files from a Linux/bsd machine. I don’t know if opened has a port for trayscale but it definitely has a port of tailscale.
Networking is fun because there are literally infinite potential options. There really isn’t a best option. It’s just what do you prefer. In my case I like to write a docker compose and write a tailscale container into it. I then set the service I want to expose either to my own tailnet or to the internet through funnel or though this other implementation I came up with a while back that I still need to do a write up on. Either way here is a guide i wrote with some docs as reference on my forgejo (git alternative). Docs are kinda a mess but hopefully it makes sense enough to help you out.
It’s nit picking but compatibility is sometimes not guaranteed with certain asset packs/features that seem to be shipped by default across certain versions. It kind of comes with the whole “hey, when you view the thing please view it using this url” aspect which is fine generally but there are always those outlier situations. Like I said though. Total nit picking.
Draw.io. Has its downsides but they are perfectly acceptable considering how bad everything else is.
The screen itself maybe however it is always going to be infinitely more intricate compared to a device that has no moving parts (minus buttons).
That would be interesting. If this is going where I think it is then it would probably suck seeing as touch screen input feels exponentially worse with latency but nonetheless would be really cool to see work for hosting a web app of sorts for desktop use.
Check out linuxserver.io, kasm and whatever the x11 version of waydroid is called. I can’t remember it at the moment. That should give you enough to get started building a container if you want.
It won’t be ready for a bit for m4 but m3 and older can run asahi. Asahi now has support for steam so now you can run steam games on linux on Apple silicon with little to no setup. Works pretty well minus a 16gb ram requirement.
Ahhh. The vypyr… I love everything about that stupid amp series.
I’d suggest learning what docker is and how to use it if you are trying to host it which is “installing” a web page.
If you want an icon to go to a dedicated window (web app experience) there are lots of options with lots of advantages and disadvantages. Just research progressive web apps. This method is going to require the frontend be hosted so you either need an instance that is using this frontend or you need to host it yourself.
Also to let you know. You’re getting downvotes because this is a very lazily asked question. You didn’t link to what it is you need help with, you asked the question in a manner that suggests you have done no research.
No hate since everyone is a beginner but I really suggest you spend a little more time crafting your questions to the community. Also read a little on docker and how lemmy front ends work.
In the meantime this should help you get started.
Afterwards go to the git repo of this ”app” pages source code. There is a one command solution to deploy it.
As long as docker is installed and set up you should just be able to enter the command for the deployment to get it running.
Go to http://localhost:8080 or if that doesn’t work https://localhost:8080 in your browser as indicated by the command and there is your front end.
Blacklisting is definitely a thing. It also depends on the device and the firmware it runs. There can be a lock on the firmware that can be triggered depending on the carrier (and the firmware of the device). I have heard of a bug in the past where a carrier that had no right was locking iPhones that were unlocked on a byod but that was like in 2013. It was also a bug.
You make good points here for the beginner however there are better alternatives and solutions for basically everything you mentioned here. The biggest I want to address is conflicts on your system. Generally running servers on metal is just outright bad practice. Containerize. Always containerize. There are lots of great options. Docker, podman, Lxc, helm, flatpak… hell. Snap if you must. Running servers on metal is generally is just asking for trouble unless the system’s entire purpose is for that. Also the cg-nat situation. Personally been behind it for a few years but it’s not a problem as long as you have a reverse proxy tunnel in place. Not a hard fix at all.
It actually kinda makes sense if you’re looking at what is essential here. They probably don’t start at 1 they probably start at 3 Then hit 7 then 12 Then 17 then 20. Anything in between is that granular torque curve sweet spot for whatever reason they require it maybe if they are way overloaded or had to stop while at capacity while going uphill.