I mean, the simplest answer is to lay a new cable, and that is definitely what I am going to do - that’s not my question.

But this is a long run, and it would be neat if I could salvage some of that cable. How can I discover where the cable is damaged?

One stupid solution would be to halve the cable and crimp each end, and then test each new cable. Repeat iteratively. I would end up with a few broken cables and a bunch of tested cables, but they might be short.

How do the pro’s do this? (Short of throwing the whole thing away!)

  • False@lemmy.world
    link
    fedilink
    English
    arrow-up
    13
    arrow-down
    1
    ·
    edit-2
    1 year ago

    You can only do 100M runs max anyways, just replace the whole thing? 100M of CAT6 is pretty cheap if you already have a box for it.

    Or is this an academic question?

    • PlutoniumAcid@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      Actual, not academic. And I agree that a new cable is cheap, which is what I will do. My question is about avoiding throwing a mostly good cable in the trash.

      • cevn@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        2
        ·
        edit-2
        1 year ago

        Pull it, cut into quarters. Add jacks to each end and test the lines.

        Nvm, I see you suggested this…

        • Lem453@lemmy.ca
          link
          fedilink
          English
          arrow-up
          6
          arrow-down
          2
          ·
          1 year ago

          m = meters. M = mega (x 1 000 000).

          That’s why Km is 1 thousand meters and Mm is 1 million meters.

          The actual unit is lower case, the multiplier is uppercase.

          • neumast@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            1
            ·
            edit-2
            1 year ago

            The actual unit is lower case, the multiplier is uppercase.

            Wouldn’t agree with that… There are many different units and multipliers. the letter being uppercase or lowercase has nothing to do with it.

            Examples:

            letters for prefixes/multipliers being uppercase and lowercase: P, T, G, M, k, h, da, d, c, m, u, n (trillion, billion, million, thousand, hundred, ten, one tenth, one hundredth, one thousandth, one millionth, one billionth)

            Letters for units being uppercase and lowercase: s, m, g, N, W, J, A, K, V, h, Hz (seconds, meter, gram, Newton, Watt, Joule, Ampere, Kelvin, Volt, hour, Hertz) (just recognised, that most units, which are named after scientists, are written with capital letters…)

            km = thousand meters/kilometer

            K = Kelvin (unit for temperature)

            M = Mega (prefix for one million)

            kJ = thousand joules

            s = second

            ms = millisecond (one thousandth)

            S = siemens (electrical conductivity)

            mS = milli siemens

            mm = millimeter (one thousandth of a meter)

            Mm = megameter (one million meters or thousand kilometers)

          • El Barto@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            1
            ·
            edit-2
            1 year ago

            For reals? Where can I read more about this?

            Edit: nevermind, I just googled it. TIL!